Brother Innov-is NV4000D, Service Manual

Page: 124 / 381

2 - 102
Main parts Embroidery
16
X sensor PCB assembly cord removal
1. Slide the X carriage assembly
1
of the main frame assembly to the right as
far as possible.
2. Cut the band from the left hook
2
on the bottom of the main frame, and
then disconnect the lead wire of the X sensor PCB assembly
3
.
3. Slide the X carriage assembly
1
of the main frame assembly to the left as
far as possible.
4. Disconnect the lead wire of the X sensor PCB assembly
3
from the right
hook
4
on the bottom of the main frame.
Start movie clip (CD-ROM version only)
1
2 3 1
4 3
17
X sensor PCB assembly removal
1. Slide the X carriage assembly of the main frame assembly to the right
limit.
2. Remove the screw
1
, and then remove the X sensor PCB assembly
1
.
1
1
18
X belt presser removal
1. Remove the screw
1
, and then remove the X belt presser
1
.
1
1