manualshive.com logo in svg

Brother HS-5000 - Color Solid Ink Printer, User Manual

Share
Download
Brother HS-5000 - Color Solid Ink Printer User Manual Download Page 29

CHAPTER 3 PRINTER DRIVER

3–1

English: HS3 User’s Guide, Chapter 2

Chapter 3    PRINTER DRIVER

The HS-5000/5300 printer driver has three settings tabs from which you can select
your printing settings for optimum print quality.  The three tabs are for Paper,
Quality/Color and Control/Maintenance.

You can use this printer with all your Windows 3.1/95/98/NT 4.0 applications.
Select Options in Print Setup available from the File menu.

The following list details the settings available in each tab

Paper 

Paper:

 Media Selection, Orientation, and Size

Paper Source
Scaling
Copy/Page Order

Quality/Color Quality

Color Control
Document Type

Control/Maintenance Showing Printer Status

Power Save
Printer Control
Maintenance
Color Adjustment

The printer driver might be updated without notice. To upgrade the printer driver,
please download it from Brother internet address: http://www.brother.com

Summary of Contents for HS-5000 - Color Solid Ink Printer





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands