manualshive.com logo in svg

Brother HS-5000 - Color Solid Ink Printer, User Manual

Share
Download
Brother HS-5000 - Color Solid Ink Printer User Manual Download Page 37

CHAPTER 4 CONTROL PANEL

4–1

English: CS3 User’s Guide, Chapter 4

Chapter 4    CONTROL PANEL

  

LEDS AND BUTTONS

Alarm

Manual

Data

Ready

Power

Filter

Ink

Paper

FF/Cont

Reset

On Line

Test

Clean

Shift

Fig. 4-1 LEDs and Buttons on the Control Panel

  Power LED

The 

Power

 LED indicates whether the printer is turned ON or OFF.

LED Printer status

Off  

❍

The printer is turned Off.

On  

●

The printer is turned On.

  Ready LED

The 

Ready

 LED indicates the current status of the printer.

LED Printer status

Off  

❍

The printer is off-line.  The printer cannot receive any print
data.

Blinking

❍↔●

The printer is warming up or cleaning the print head.

On   

●

The printer is ready to print.

This LED blinks with the 

Alarm

 LED to indicate a paper error. See “Operator

Calls” in Chapter 7.

Summary of Contents for HS-5000 - Color Solid Ink Printer





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands