manualshive.com logo in svg

Brother HS-5000 - Color Solid Ink Printer, User Manual

Share
Download
Brother HS-5000 - Color Solid Ink Printer User Manual Download Page 7

vii

English: CS-5xxx User’s Guide, Preliminary (TOC)

To Use the Printer Safely

 

Warning

After you have just used the printer, some internal parts of the printer are
extremely hot. Do not open the inside cover unnecessarily and never touch
the shaded parts (Quench Platen, Platen, and Print Head) shown in the
following illustration.

 

High Temperature

Inside the Printer

 

Warning

There are high voltages inside the printer. Before cleaning the printer, be
sure to turn the power off and unplug the power cord from the power
outlet.

1

2

Turning off the Switch and Unplugging the Printer

 

Warning

Keep the ink cartridge away from children.  If ink is swallowed, drink
plenty of water.  The ink contains no harmful substances, but if you are
concerned you should consult a doctor.

Quench Platen

Platen

Print head

Summary of Contents for HS-5000 - Color Solid Ink Printer





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands