manualshive.com logo in svg

Brother HS-5000 - Color Solid Ink Printer, User Manual

Share
Download
Brother HS-5000 - Color Solid Ink Printer User Manual Download Page 32

USER’S GUIDE

3–4

English: HS3 User’s Guide, Chapter 2

  

QUALITY AND COLOR

This tab allows you to set up print quality, media, color and document type you want
to print.

  Quality

Normal 300 x 300 dpi.  Recommended mode for ordinary printouts. Good
print quality with reasonable print speed.  This mode is the default setting.

Fine 600 x 600 dpi. The finest print mode.  Use this mode to print precise
images such as photographs.  Since the print data is much larger than in normal
mode,  processing time, data transfer time and printing time will be longer.

Enhancement Use this mode for printing photographs or business graphics.
Enhancement mode optimizes color image printing as this mode reduces the
horizontal lines or banding that is sometimes visible on Enhancement OFF.  Printing
Enhancement mode is slower than doing the mode OFF.

Summary of Contents for HS-5000 - Color Solid Ink Printer





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands