General Information
76
3
Machine status messages
3
The following table shows the machine status messages during normal operation:
1
When the Wireless Network is enabled or an optional card reader is connected, the machine does not transfer to Deep Sleep mode. If you want
to disable the Wireless Network, change the setting of
WLAN Enable
to
Off
. (See
Machine Status Message
Meaning
Cooling Down
The machine is cooling down.
Job Cancel (All)
Cancel Printing
The machine is canceling the job.
Ignore Data
The machine is ignoring data processed using the PS driver.
Pause
The machine has suspended its operations. Press
Go
to start the machine
again.
Please Wait
The machine is starting.
The machine is carrying out the calibration process.
Printing
The machine is printing.
Ready
The machine is ready to print.
Sleep
In Sleep mode (power save mode) the machine acts as though it were turned
off, but the machine can still receive data. Receiving a print job will
automatically wake up the machine to start printing.
Deep Sleep
In Deep Sleep mode (reducing more power consumption than Sleep mode),
the machine acts as though it were turned off. If the machine does not receive
data for a certain length of time while it is in Sleep mode, it enters Deep Sleep
mode automatically.
