Brother HL-3040CN, Network User'S Manual

Page: 80 / 211

Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
70
5
Configuration in Infrastructure mode using SES/WPS or
AOSS from the control panel menu (without network cable)
5
If your wireless access point/router supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC
1
) or
AOSS™, you can configure the machine easily without knowing your wireless network settings. Your Brother
machine has the SES/WPS/AOSS menu on the control panel. This feature automatically detects which mode
your access point uses, SecureEasySetup™, Wi-Fi Protected Setup or AOSS™. By pushing a button on the
wireless access point/router, you can setup the wireless network and security settings. See the user’s guide
for your wireless access point/router for instructions on how to access one-push mode.
1
Push Button Configuration
Note
Routers or access points that support SecureEasySetup™, Wi-Fi Protected Setup or AOSS™ have the
symbols shown below.
Before configuring the wireless settings
5
IMPORTANT
The following instructions will install your Brother machine in a network environment using the Brother
installer application for Macintosh found on the CD-ROM we have provided with the machine.
If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
If you have previously configured the wireless settings of the printer, you must reset the print server back
to its factory default settings. (see
Reset the network settings to the factory default on page 122).
If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once
you are sure that you can print, configure the software settings following the instructions.