7. USING THE SEWING MACHINE (OPERATION PANEL: ADVANCED OPERATION)
HE-800C
54
3
Switch to cycle program mode.
(1) Cycle program number
(2) Step number
(3) Contents (program number, cutter operation) set for the
selected step number 1
4
Set the contents (3) for step 1 to “P01”.
* The “_” underneath “P” and the cutter icon (4) signify that
cutter operation is enabled.
* The “--” in “P--” means that no setting has been made.
When “--” is set, the contents for all subsequent steps are
cleared.
5
Apply the changed contents.
The contents (3) for step 1 will change from flashing to steadily illuminated.
6
Set the step number (2) to “S02”.
7
Repeat steps 4 and 5 above to set the contents for step 2 of the cycle program to “P01”, the same contents as for step 1.
8
Set the step number (2) to “S03”.
9
Repeat steps 4 and 5 above to set the contents for step 3 of the cycle program to “P01”, the same contents as for step 1.
(Continued on next page)
4212B
4839M
4842M
4787M
4211B
4840M
4792M
4787M
4841M
