manualshive.com logo in svg

Brother HE-800C, Instruction Manual

Share
Download
Brother HE-800C Instruction Manual Download Page 59

 

 

HE-800C 

6. USING THE SEWING MACHINE (SEWING OPERATION)

50

 

3 

Depress the treadle to the 2nd step (C). 

 
 

 
 
 
 
 
 

The work clamp will drop, and test feeding will start. 

*

 

However, if the sewing data is protruding outside the sewing area, 

“OVER SEW AREA” will be displayed for 1.5 seconds, and test 
feeding will not be carried out. 

 

4 

Test feeding in progress 

 

・

 

When the treadle is returned to the neutral position, test feeding will be 
interrupted. 

・

 

If the treadle is depressed to the 2nd step (C), test feeding operation will 
move forward. 

・

 

Test feeding operation moves forward by one stitch each time the 

  key 

is pressed.   
(The 

  key changes operation to the opposite direction.) 

・

 

When the cutter operating position is reached, the buzzer will sound and 
the cutter icon will be displayed for one second. 

 

 

*

 

If you press the AUTO key, test feeding mode will be exited and the 

sewing machine will switch to the automatic sewing standby condition. 

 
 
 

<Manual sewing method> 

Turn the pulley (4) by hand in the direction of the arrow 
during test feeding. 

・

 

Feeding will move forward by one stitch for each 
rotation of the pulley (4). 

・

 

Test feeding operation by turning the pulley (4) by 
hand also moves the needle up and down, so if 
material has been set and the sewing machine is 
threaded with thread, manual sewing can be carried 
out. 

 

 
 

 
 

5 

Test feeding complete 

When the number of stitches remaining reaches “0”, depress the treadle to the 2nd step (C). 
 
 
 
 
 
 
 
 

・

 

The above message will be displayed for 1.5 seconds. 

・

 

The work clamp will rise, and test feeding mode will be exited. 

 

NOTE: 

If you press the RESET key during test feeding or after test feeding is complete, the needle bar and the work clamp will 
carry out home position detection, and then they will return to the sewing start position. 

Number of stitches 
remaining

 

4824M

4822M 

4825M

4822M 

4921M

4823M

Summary of Contents for HE-800C












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands