10 - 2
P R I N T I N G R E P O R T S
3
Enter the time to begin printing, in 24-hour format, and then press
Menu/Set
.
(For example: enter 19:45 for 7:45 PM.)
4
Press
Stop/Exit
.
Using the Reports Key
Press
Reports
, then press
to select the report you want, and then press
Menu/Set
.
Six reports are available:
Prints the Menu Table and programming
instructions so you can see at-a-glance how to
quickly program every menu selection.
Lists names and numbers stored in One Touch
and Speed Dial memory, in numerical order.
Lists information about the last 30 incoming
and outgoing faxes. TX means Transmit; RX
means Receive.
Prints a Transmission Verification Report for
your last transmission.
Lists settings for
INITIAL SETUP
,
SETUP
RECEIVE
,
SETUP SEND
,
SETUP
REPORTS
, and
TEL SERVICE
. The settings
for
REMOTE FAX OPT
are included.
Lists summary information of stored faxes and
the percentage of used memory.
Note
Don’t forget to set up the Fax Activity Report and Transmission Verification
Report as explained on page 10-1.
or
1 . H E L P L I S T
2 . A U T O D I A L
3 . F A X A C T I V I T Y
4 . T R A N S M I S S I O N
5 . U S E R S E T T I N G S
6 . M E M O R Y S T A T U S