Brother FAX-2950 Service Manual Download Page 83

Page: 83 / 276

2-46

Confidential

Error code A1

The front cover sensor detected that the front cover was open.

Error code A2

The document scanning position sensor detected that the document length was 90 cm or
more while scanning the document.

Cover is Open
Close the Front Cover.

<User Check>

• Check that the front cover is closed correctly.

Step

Cause

Remedy

Connection failure of the high
voltage power supply PCB
ASSY harness (Front cover
sensor is mounted in high
voltage power supply PCB
ASSY.)

Reconnect the high voltage power supply PCB
ASSY harness.

Part pressing the front cover
sensor is broken, which is
provided at inside of front cover

Replace the front cover ASSY.

Front cover sensor failure

Check the performance of the front cover
sensor following the procedure in

"Function

code 32"

. If any problem occurs, replace the

high voltage power supply PCB ASSY.

Main PCB failure

Replace the main PCB ASSY.

Document Jam
Clear the scanner jam, then press the Stop Key.

<User Check>

• Check that the document or the foreign object is not jammed in the ADF. If jammed,

remove it.

Step

Cause

Remedy

Document scanning position
actuator catching on some
position

Correct the position of the document scanning
position actuator.

Document scanning position
sensor failure

Replace the panel PCB ASSY.

Main PCB failure

Replace the main PCB ASSY.

Summary of Contents for FAX-2950





















































































































































































































































































Search results

Summary of Contents for FAX-2950

Reviews:

Related manuals for FAX-2950

Brands by name

Popular brands

Brother FAX-2950, Service Manual

Search results

Summary of Contents for FAX-2950

Reviews:

Related manuals for FAX-2950

Brands by name

Popular brands