manualshive.com logo in svg

Brother FAX-2950, Service Manual

The Brother FAX-2950 is a versatile, high-performance fax machine designed to meet your business needs. With its Basic User's Manual, you can easily set up and operate the machine hassle-free. Download the manual for free from our manualshive.com, where you'll find all the information you need to maximize the potential of your FAX-2950.

Share
Download
background image

Confidential

CHAPTER 3 DISASSEMBLY/REASSEMBLY

This chapter describes procedures for disassembling and reassembling the machine with 
related notes.

The provided disassembly order flow enables you to take in the disassembly procedure of 
related part at a glance.

At the start of disassembling, you can check the disassembly order flow which guides you 
through a shortcut to get to the part.

This chapter also covers screw tightening torques and lubrication points where the specified 
lubrication should be applied when the machine is assembled.

CONTENTS

1. SAFETY PRECAUTIONS .............................................................................................3-1

2. PACKING ......................................................................................................................3-2

3. SCREW CATALOGUE ..................................................................................................3-3

4. SCREW TORQUE LIST ................................................................................................3-4

5. LUBRICATION ..............................................................................................................3-6

6. OVERVIEW OF GEARS................................................................................................3-7

7. HARNESS ROUTING..................................................................................................3-10

8. DISASSEMBLY FLOW CHART..................................................................................3-23

9. DISASSEMBLY PROCEDURE ...................................................................................3-24

9.1

Preparation ............................................................................................................... 3-24

9.2

Paper tray ................................................................................................................. 3-26

9.3

Cord hook ................................................................................................................. 3-29

9.4

Back cover ................................................................................................................ 3-30

9.5

Outer chute ASSY..................................................................................................... 3-31

9.6

Fuser unit cover ........................................................................................................ 3-32

9.7

Front cover ASSY ..................................................................................................... 3-33

9.8

Document tray ASSY ................................................................................................ 3-34

9.9

Side cover L .............................................................................................................. 3-35

9.10 Side cover R ............................................................................................................. 3-35
9.11 Upper back cover...................................................................................................... 3-36
9.12 Handset holder (Upper cover L for no Handset model) / Upper cover R .................. 3-37
9.13 Hook switch PCB ASSY / Hook actuator .................................................................. 3-38
9.14 Unfold support flap.................................................................................................... 3-38
9.15 Control panel cover link ............................................................................................ 3-38
9.16 Document chute ASSY ............................................................................................. 3-39
9.17 Document chute upper ASSY ................................................................................... 3-41
9.18 Separation pad ASSY ............................................................................................... 3-42
9.19 Control panel ASSY .................................................................................................. 3-43
9.20 Document separate roller.......................................................................................... 3-45

Summary of Contents for FAX-2950





















































































































































































































































































Reviews:

No comments

Related manuals for FAX-2950

Canon iP2600 - PIXMA Color Inkjet Printer Setup Instructions preview
iP2600 - PIXMA Color Inkjet Printer
Brand: Canon Pages: 2
Oki B410D Specifications preview
B410D
Brand: Oki Pages: 4
Konica Minolta DiMAGE Scan Elite 5400 II Instruction Manual preview
DiMAGE Scan Elite 5400 II
Brand: Konica Minolta Pages: 38
Xerox DocuPrint C2535 A User Manual preview
DocuPrint C2535 A
Brand: Xerox Pages: 120
Canon LBP7018C E-Manual preview
LBP7018C
Brand: Canon Pages: 343
Canon LBP654C Series Getting Started preview
LBP654C Series
Brand: Canon Pages: 380
Canon MAXIFY GX4070 Manual preview
MAXIFY GX4070
Brand: Canon Pages: 13
Perel PMG06 User Manual preview
PMG06
Brand: Perel Pages: 13
Matan Barak Technical Note preview
Barak
Brand: Matan Pages: 8
MIMAKI jv34 series Daily Maintenance preview
jv34 series
Brand: MIMAKI Pages: 8
WOOSIM WSP-P440 Operator'S Manual preview
WSP-P440
Brand: WOOSIM Pages: 17
Woosim Systems PORTI-SW40 Operator'S Manual preview
PORTI-SW40
Brand: Woosim Systems Pages: 27
Fukun FK- POS58 User Manual preview
FK- POS58
Brand: Fukun Pages: 2
MIMAKI JV400-130SUV Operation Manual preview
JV400-130SUV
Brand: MIMAKI Pages: 194
MYTRIX Dreamweaver User Manual preview
Dreamweaver
Brand: MYTRIX Pages: 56
Oki OKIPAGE 12i Series User Manual preview
OKIPAGE 12i Series
Brand: Oki Pages: 66
Lexmark WinWriter 100 Service Manual preview
WinWriter 100
Brand: Lexmark Pages: 77
Nipson Varypress 200 Paper Manual preview
Varypress 200
Brand: Nipson Pages: 25

Brands by name

Popular brands

Load more brands