manualshive.com logo in svg

Brother FAX-2950, Service Manual

The Brother FAX-2950 is a versatile, high-performance fax machine designed to meet your business needs. With its Basic User's Manual, you can easily set up and operate the machine hassle-free. Download the manual for free from our manualshive.com, where you'll find all the information you need to maximize the potential of your FAX-2950.

Share
Download
background image

Confidential

CHAPTER 2 TROUBLESHOOTING

This chapter details error messages and codes which the incorporated self-diagnostic 
function of the machine will display if any error or malfunction occurs. If any error message 
appears, refer to this chapter to find which parts should be checked or replaced.

The latter half of this chapter provides sample problems which could occur in the main 
sections of the machine and related troubleshooting procedures. These will help service 
personnel identify and repair other similar defective sections.

CONTENTS

1. INTRODUCTION ...........................................................................................................2-1

1.1 Precautions............................................................................................................2-1

1.2 Initial Check ...........................................................................................................2-3

2. OVERVIEW ...................................................................................................................2-5

2.1 Cross-section Drawing ..........................................................................................2-5

2.1.1 Printer part..................................................................................................2-5

2.1.2 Scanning part .............................................................................................2-6

2.2 Paper Feeding .......................................................................................................2-7

2.2.1 Printer part..................................................................................................2-7

2.2.2 Scanning part .............................................................................................2-8

2.3 Operation of Each Part ..........................................................................................2-9

2.4 Block Diagram .....................................................................................................2-10

2.5 Main Components ............................................................................................... 2-11

2.6 Life of Toner Cartridge and Drum Unit.................................................................2-12

3. ERROR INDICATIONS................................................................................................2-14

3.1 Error Codes .........................................................................................................2-14

3.2 Error Messages ...................................................................................................2-19

3.3 Communication Error Codes ...............................................................................2-21

3.4 Error Cause and Remedy....................................................................................2-24

3.5 Paper Feeding Troubleshooting ..........................................................................2-60

3.5.1 Pickup function of paper tray does not work ............................................2-60

3.5.2 No feeding ................................................................................................2-60

3.5.3 Double feeding .........................................................................................2-61

3.5.4 Dirt on paper............................................................................................. 2-61

3.5.5 Paper feeding at an angle ........................................................................2-61

3.5.6 Wrinkles or creases..................................................................................2-62

3.5.7 Curl in the paper.......................................................................................2-63

3.6 Image Defect Troubleshooting ............................................................................2-64

3.6.1 Image defect examples ............................................................................2-64

3.6.2 Troubleshooting according to image defect .............................................2-65

3.7 Software Setting Troubleshooting........................................................................2-76

Summary of Contents for FAX-2950





















































































































































































































































































Reviews:

No comments

Related manuals for FAX-2950

Xerox 2000 Series Operation Manual preview
2000 Series
Brand: Xerox Pages: 36
WaxJet 6100 Service Reference Manual preview
6100
Brand: WaxJet Pages: 131
Raise3D PRO2 Series Quick Start Manual preview
PRO2 Series
Brand: Raise3D Pages: 32
Canon imageCLASS MF269dw Setup Manual preview
imageCLASS MF269dw
Brand: Canon Pages: 32
Samsung ML-7300N User Manual preview
ML-7300N
Brand: Samsung Pages: 158
BIXOLON SRP-500 Command Manual preview
SRP-500
Brand: BIXOLON Pages: 29
Dascom T5040 User Manual preview
T5040
Brand: Dascom Pages: 146
Wasp 4070 FX Manual Of Use preview
4070 FX
Brand: Wasp Pages: 86
Oki MICROLINE ML310 Handbook preview
MICROLINE ML310
Brand: Oki Pages: 32
WANHAO 0106001 Instruction Manual preview
0106001
Brand: WANHAO Pages: 60
Pantum M6700D Series User Manual preview
M6700D Series
Brand: Pantum Pages: 164
Creality 3D HALOT-ONE User Manual preview
HALOT-ONE
Brand: Creality 3D Pages: 65
Axiohm TPOSS001 Setup Manual preview
TPOSS001
Brand: Axiohm Pages: 6
Kyocera Mita Ecosys FS-6020 Service Manual preview
Ecosys FS-6020
Brand: Kyocera Mita Pages: 14
AccuBANKER MP20 Quick Start Manual preview
MP20
Brand: AccuBANKER Pages: 5
Star Micronics SP500 Series Technical Manual preview
SP500 Series
Brand: Star Micronics Pages: 73
Oki C3600n Guide Utilisateur preview
C3600n
Brand: Oki Pages: 159
MINOLTA-QMS Magicolor 2200 DeskLaser Installation Manual preview
Magicolor 2200 DeskLaser
Brand: MINOLTA-QMS Pages: 70

Brands by name

Popular brands

Load more brands