Brother FAX 1840C Service Manual Download Page 311

Page: 311 / 401

App. 3-1

Confidential

EEPROM CUSTOMIZING CODES

This function allows you to customize the EEPROM according to language, function settings, and
firmware switch settings.

Operating Procedure

(1) Press the

Menu/Set

and

Black

Start (Mono Start)

keys. Next press the key four times to

make the machine enter the maintenance mode.

The machine beeps for approx. one second and displays "

" on the

LCD.

(2) Press the

and

keys in this order in the initial stage of the maintenance mode.

The current customizing code appears (e.g., 0001 in the case of MFC3340CN U.S.A. model).

(3) Enter the desired customizing code (e.g., 0002 in the case of MFC3340CN Canadian model).

The newly entered code appears.

NOTE:

If a wrong 4-digit code is entered, the machine will malfunction.

(4) Press the

Black

Start (Mono Start)

key.

The machine saves the setting and returns to the initial stage of the maintenance mode.

If you press the

Stop/Exit

key or no keys are pressed for one minute in the above procedure, the

machine stops the procedure and returns to the initial stage of the maintenance mode.

Summary of Contents for FAX 1840C


















































































































































































































































































































































































































Search results

Summary of Contents for FAX 1840C

Reviews:

Related manuals for FAX 1840C

Brands by name

Popular brands

Brother FAX 1840C, Service Manual

Search results

Summary of Contents for FAX 1840C

Reviews:

Related manuals for FAX 1840C

Brands by name

Popular brands