manualshive.com logo in svg

Brother DCP-L5500D, Service Manual

Share
Download
Brother DCP-L5500D Service Manual Download Page 299

4-2

Confidential

1.1 Installing Firmware (Sub Firmware and Main Firmware) 

1.1.1 Checking firmware version

Check whether the firmware installed on the machine is the latest version. If it is the latest 
version, there is no need to install the firmware. If it is not, be sure to install the firmware to 
the machine as described in 

“1.1.2 Installing firmware”

.

<How to check firmware version>

(1) Press and hold the [Home] key for approximately five seconds while the machine is in 

the ready state. Press the blank field at the bottom. Press the [*], [2], [8], [6], and [4] key 
on the LCD in this order, and the machine enters into maintenance mode.

(2) Press the [2], and then the [5] key in the initial state of maintenance mode. "MAIN:Ver*.** 

(#)" is displayed on the LCD.

(3) Change the displayed item by pressing the [Mono Start] key to check all firmwares.
(4) When you press the [X] key, this operation is finished and the machine returns to the 

initial state of maintenance mode.

Memo:

• You can also check the sub firmware and main firmware versions by implementing 

"Print maintenance information (function code: 77)" (refer to 

“1.3.25  Print 

maintenance information (function code: 77)” in Chapter 5

).

Summary of Contents for DCP-L5500D

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands