manualshive.com logo in svg

Brother DCP-L5500D, Service Manual

Share
Download
Brother DCP-L5500D Service Manual Download Page 11

viii

Confidential

SAFETY INFORMATION

Definitions of Warnings, Cautions and Notes

The following conventions are used in this manual:

 

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could result 
in death or serious injuries.

 

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in 
minor or moderate injuries.

 

IMPORTANT

IMPORTANT indicates a potentially hazardous situation which, if not avoided, may result 
in damage to property or loss of product functionality.

Prohibition icons indicate actions that must not be performed.

Electrical Hazard icons alert you to possible electrical shocks.

Fire hazard icons alert you to the possibility of a fire.

Hot Surface icons warn you not to touch product parts that are hot.

Note

Notes tell you how you should respond to a situation that may arise or give tips 
about how the operation works with other features.

Summary of Contents for DCP-L5500D

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands