manualshive.com logo in svg

Brother DCP-9010CN, Service Manual

Share
Download
Brother DCP-9010CN Service Manual Download Page 504

7-46

Confidential

1.4.24 Sensitivity adjustment of registration mark sensor and check of belt 

surface (Function code 75)

<Function>

This function makes the registration mark sensor to adjust its sensitivity compulsory.  This 
allows you to check if the registration mark sensor works properly.  This function makes the 
machine to check the surface of the belt unit by using the registration mark sensor as well.

<Operating procedure>

(1) Press the 

7

 and 

5

 buttons in this order in the initial state of the maintenance mode.   

“REGI SENS ADJUST” is displayed on the LCD.

(2) Press the

or

button to select the appropriate item.

(3) Press the 

OK

 button to execute the selected item.

(4) When the operation is finished, the machine beeps for one second and returns to the 

initial state of the maintenance mode.

LCD

Description

REGI_SENS ADJUST
BELT OFF

Adjust the sensitivity of the registration mark sensor when the belt 
unit is not operated.  This is to check whether the registration 
mark sensor’s operation is okay or not.

REGI_SENS ADJUST
BELT ON

Adjust the sensitivity of the registration mark sensor while the belt 
unit is driving. (This is the same as the sensitivity adjustment 
performed before adjustment of color registration.)

REGI_SENS ADJUST
BELT CHECK

Check that there are no scratches on the surface of the belt unit of 
the registration mask sensor.

Note: 

- If you press the 

OK 

button during the sensitivity adjustment or after the error message 

appears on the LCD, the sensitivity adjustment is started again.

- In the case that the error occurs, refer to the 

next page 

to check the error description and 

the way to solve it.

Summary of Contents for DCP-9010CN























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands