manualshive.com logo in svg

Brother DCP-9010CN, Service Manual

Share
Download
Brother DCP-9010CN Service Manual Download Page 448

6-7

Confidential

1.1 Rewriting the Firmware (Main Firmware, Sub Firmware 

(PCL/PS))

The following two methods are available for rewriting the firmware (Main firmware and Sub 
firmware (PCL/PS)).
- Rewriting using a computer
- Rewriting using USB flash memory (USB direct interface model only)

1.1.1 Checking firmware version

Check if the firmware written on the main PCB is the latest version or not.  If it is the latest 
version, there is no need to write the firmware.  If it is not, make sure to write the firmware to the 
main PCB in accordance with “1.1.2. Rewriting the firmware using computer” or 

“1.1.3 Rewriting 

the firmware using USB flash memory (USB direct interface model only)” in this chapter

.

<How to check firmware version>

(1) Press the 

2 

and 

5 

buttons in this order in the initial state of the maintenance mode.  

Then, the firmware version information is displayed on the LCD.

1.1.2 Rewriting the firmware using computer

The following firmware files are needed to rewrite the firmware.

<Procedures>

(1) Turn the power switch of the machine OFF.  Turn on the power as pressing the 

5

 button.

  

Check that “

” appears on the LCD.

(2) Double-click the “FILEDG32.EXE” to start.  The following screen appears.  Select the 

“Brother Maintenance USB Printer.”

Sub firmware (PCL/PS)

LZXXXX_$.upd

Main firmware

LZXXXX_$.upd

LZXXXX: First six digits are a parts number of the firmware.

$: Alphabet representing the revision of the firmware.

Note: 

- It is recommendable to rewrite 1) Sub firmware (PCL/PS) and 2) Main firmware in this 

order.

- DO NOT unplug the power cord of the machine or your computer or disconnect the USB 

cable while rewriting the program files.

Summary of Contents for DCP-9010CN























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands