Chapter 7
34
Changing the SCAN key settings
7
Before scanning
7
To use the machine as a scanner, install a scanner driver. If the machine is on a network,
configure it with a TCP/IP address.
Install the scanner drivers from the Installer CD-ROM. (See Quick Setup Guide.)
Configure the machine with a TCP/IP address if network scanning does not work.
(See Software User's Guide:
Configuring Network Scanning (Windows
®
)
.)
SCAN key settings
7
You can change your machine’s
SCAN
key settings using ControlCenter4.
a
Open ControlCenter4 by clicking
Start
/
All Programs
/
Brother
/
XXX-XXXX
(where
XXX-XXXX is your model name)/
ControlCenter4
. The ControlCenter4 application will open.
b
Make sure the machine you want to use is selected from the
Model
pull-down list.
c
Click the
Device Settings
tab.
d
Click
Device Scan Settings
.