Brother BAS-342G PS, Service Manual

Page: 22 / 152

2. FUNCTION SETTINGS
13 BAS-342G
No.
Setting
value
Setting item
Default
value
Thread nipper device (wiper replacement type)
OFF Disabled 566
ON Thread nipper device is used.
OFF
Thread tension disc status during feeding
OFF Released 567
ON Not released
OFF
Auxiliary tension release device
OFF Disabled
568
ON
Auxiliary tension release device is used.
(Tension release operation is the same as if memory switch No. 564=0)
OFF
Error processing settings
No.
Setting
value
Setting item
Default
value
Error release method when operation has stopped
0 Press the RESET key.
1 Press the RESET key or the STOP switch.
650
2 Press the RESET key or input a signal from the external switch (EXIN3).
0
Needle stop position when sewing is interrupted by the STOP switch
0 Needle stops in the down position.
1 Needle stops in the up position.
651
2 Needle stops in the up position after thread trimming.
0
Thread trimming operation when sewing is paused
OFF Thread trimming is carried out when the pause is canceled.
652
ON Thread trimming is not carried out when the pause is canceled.
OFF
Resuming sewing after sewing is paused
OFF STOP switch RESET key key Sewing starts 653
ON STOP switch RESET key Sewing starts
OFF
Disables the needle up stop position monitoring sensor
OFF Sensor is enabled and needle up stop position errors [E110] are detected. 655
ON Disabled
OFF
Home position return when sewing is paused
OFF Mechanism moves to home position and then moves to sewing start position.
656
ON
Mechanism steps back to the sewing start position along the sewing path without
moving to the home position.
OFF