Brother 888-g80 Operation Manual Download Page 78

Page: 78 / 101

Making Embroidery Adjustments

Embroidering

E-29

BRO

ER
Y

Sold separately with some models.

Extra large frame embroidering area
26 cm×16 cm (10-1/4 inches × 6-1/4 inches)

Center mark

Large frame embroidering area

18 cm × 13 cm (7 inches × 5 inches)

Embroidering area for border embroidery frame

18 cm × 10 cm (7 inches × 4 inches)

Embroidery area for quilt embroidery frame

15 cm × 15 cm (6 inches × 6 inches)

Medium frame embroidering area

10 cm × 10 cm (4 inches × 4 inches)

Embroidery area for small embroidery frame

2 cm × 6 cm (1 inch × 2-1/2 inches)

Grid lines

Press

to return to the original screen.

Selecting/displaying patterns according to
the embroidery frame size

If “Embroidery Frame Identification View” in the settings
screen is set to “ON”, the pattern can be edited in the screen
as if that embroidery frame is attached.

When “Embroidery Frame Identification View” is set to
“OFF”.

The embroidering area for the extra large frame is
displayed.

When “Embroidery Frame Identification View” is set to
“ON”.

The embroidering area for the selected frame is
displayed.

Patterns that will not fit in the selected frame appear
shaded and cannot be selected.

Memo

• Patterns that cannot be sewn in the selected

embroidery frame will not be available in the
pattern selection screen.

• The pattern will be enlarged or reduced within the

embroidering area for the selected embroidery
frame.

• When enlarging the pattern by pressing

the editing screen, it is enlarged to 100% of the
size for the selected embroidery frame.

Summary of Contents for 888-g80






































































































Search results

Summary of Contents for 888-g80

Reviews:

Related manuals for 888-g80

Brands by name

Popular brands

Brother 888-g80, Operation Manual

Search results

Summary of Contents for 888-g80

Reviews:

Related manuals for 888-g80

Brands by name

Popular brands