Brother 888-g80 Operation Manual Download Page 23

Page: 23 / 101

LCD Operation

B-12

■

Choosing the display language

Press .

Display page 5.

Use

and

to choose the display language.

Display language

Press

to return to the original screen.

Adjusting input sensitivity for operation keys

You can adjust the sensitivity of the operation keys to five
levels. Display the settings screen to set desired level.

Operation keys

Press

to display the settings screen.

Display page 6 by pressing

Press “Start”.

→

The adjusting screen is displayed.

Adjust the “Input Sensitivity” by pressing

• The higher the setting, the more sensitive the keys

will be. The default setting is “3”.

Press

to return to previous screen.

■

If the machine does not respond when an
operation key is pressed

Hold down

(Thread cutter button) and turn on the

machine to reset the setting. Display the settings screen,
and then adjust the setting again.

Note

• We recommend selecting the highest setting if

an electrostatic touch pen is being used.

Summary of Contents for 888-g80






































































































Search results

Summary of Contents for 888-g80

Reviews:

Related manuals for 888-g80

Brands by name

Popular brands

Brother 888-g80, Operation Manual

Search results

Summary of Contents for 888-g80

Reviews:

Related manuals for 888-g80

Brands by name

Popular brands