Brother 888-g80 Operation Manual Download Page 17

Page: 17 / 101

Names of Machine Parts and Their Functions

B-6

Optional accessories

The following are available as optional accessories to be purchased separately. For more optional accessories and their part
codes, refer to the Quick Reference Guide.

Embroidery frame set (large)
18 cm (H) × 13 cm (W) (7 inches (H) × 5 inches (W))

Embroidery frame set (medium)
10 cm (H) × 10 cm (W) (4 inches (H) × 4 inches (W))

Embroidery frame set (small)
2 cm (H) × 6 cm (W) (1 inch (H) × 2-1/2 inches (W))

Border embroidery frame set
18 cm (H) × 10 cm (W) (7 inches (H) × 4 inches (W))

Square embroidery frame
15 cm (H) × 15 cm (W) (6 inches (H) x 6 inches (W))

Stabilizer material for
embroidery

Water soluble stabilizer

Memo

• To obtain optional accessories or parts, contact your authorized Brother dealer.

• All specifications are correct at the time of printing. Please be aware that some specifications may change without

notice.

• Visit your nearest authorized Brother dealer for a complete listing of optional accessories available for your machine.

• Always use accessories recommended for this machine.

Summary of Contents for 888-g80






































































































Search results

Summary of Contents for 888-g80

Reviews:

Related manuals for 888-g80

Brands by name

Popular brands

Brother 888-g80, Operation Manual

Search results

Summary of Contents for 888-g80

Reviews:

Related manuals for 888-g80

Brands by name

Popular brands