Brother 888-g80 Operation Manual Download Page 88

Page: 88 / 101

Care and Maintenance

Appendix

A-3

MAI

NC
E A
ND T

LES
HO

■

If there is a screw in the needle plate cover

1 Use the L-shaped (or disc-shaped) screwdriver to

remove the screw in the needle plate cover.

2 Grasp both sides of the needle plate cover, and then

slide it toward you.

Needle plate cover

■

If there is no screw in the needle plate cover

1 Grasp both sides of the needle plate cover, and then

slide it toward you.

Needle plate cover

Remove the bobbin case.

Grasp the bobbin case, and then pull it out.

Bobbin case

Use the cleaning brush or a vacuum cleaner to remove
any lint and dust from the race and bobbin thread
sensor and the surrounding area.

Cleaning brush

Race

Bobbin thread sensor

• Do not apply oil to the

bobbin case

Insert the bobbin case so that the

mark on the

bobbin case aligns with the

mark on the machine.

• Align the

and

marks.

mark

Bobbin case

• Make sure that the indicated points are aligned

before installing the bobbin case.

Summary of Contents for 888-g80






































































































Search results

Summary of Contents for 888-g80

Reviews:

Related manuals for 888-g80

Brands by name

Popular brands

Brother 888-g80, Operation Manual

Search results

Summary of Contents for 888-g80

Reviews:

Related manuals for 888-g80

Brands by name

Popular brands