Brother 882-S90/S91 Operation Manual Download

Page: 200 / 249

EDITING PATTERNS

Embr
oi

de
ry

dit

189

Repeat the previous steps until all desired
thread colors are specified.

To delete a specified color from the palette, press

Press

to return to the original

screen.

■

Adding a Color to the Custom

Thread Table from the List

Repeat the previous steps

through

Press

to display the thread list.

Use

to select a thread color.

Thread list

Thread brand

Press .

Repeat the previous steps until all desired
thread colors are specified.

To delete a specified color from the palette, press

Choosing a Color from the
Custom Thread Table

You can select a color from the up to 300 thread
colors you have set in the custom thread table.

Press .

→

The thread color palette screen displays.

Press

to put the color you want

to change at the top of the sewing order.

Summary of Contents for 882-S90/S91


























































































































































































































































Search results

Summary of Contents for 882-S90/S91

Reviews:

Related manuals for 882-S90/S91

Brands by name

Popular brands

Brother 882-S90/S91, Operation Manual

Search results

Summary of Contents for 882-S90/S91

Reviews:

Related manuals for 882-S90/S91

Brands by name

Popular brands