Brother 882-S90/S91 Operation Manual Download

Page: 146 / 249

SELECTING PATTERNS

Embr
oi

de
ry

135

Proceed to see “VIEWING THE SEWING
SCREEN” on page 136 to embroider the
pattern.

To return to the previous screen to select another

pattern, press

Selecting Patterns from
Embroidery Cards

■

About Embroidery Cards

(Sold Separately)

• Use only embroidery cards manufactured for this

machine. Using unauthorized cards may cause
your machine to operate incorrectly.

• Embroidery cards sold in foreign countries

cannot be used with this machine.

• Store embroidery cards in the hard case.

Insert the card completely into the slot on
the right side of the machine.

Insert the embroidery card so that the end with a
printed arrow is facing the front.

Press .

→

The patterns on the embroidery card are displayed
on the selection screen.

Follow the steps on page 132 to select a
pattern.

Selecting Patterns from USB
media/Computer

To recall patterns from the computer or USB
media, see pages 170 through 172.

Note

• Only insert or remove the embroidery card

when

is displayed, or when the

machine is turned off.

• Do not insert the card in a direction other

than that shown by the arrow on the card,
and do not force the card into the slot
strongly. Do not put any object except for the
embroidery cards into the slot. Otherwise,
your machine may be damaged.

Summary of Contents for 882-S90/S91


























































































































































































































































Search results

Summary of Contents for 882-S90/S91

Reviews:

Related manuals for 882-S90/S91

Brands by name

Popular brands

Brother 882-S90/S91, Operation Manual

Search results

Summary of Contents for 882-S90/S91

Reviews:

Related manuals for 882-S90/S91

Brands by name

Popular brands