NOV12GB Issue 2
12
Plumbing Advice
Boiler installations should only be carried out by qualified heating engineers who
hold a HETAS wet systems certificate or equivalent. A site survey prior to
commencing installation is highly recommended to identify any potential problem
areas.
The stove is fitted with four 1” female pipe connections as shown below. It is important to
note that the boiler on this appliance is one singular open vessel so it is perfectly possible
to only use two connections (and cap the others off).
The top connections are the flow and bottom connections return. It is good practice to use
diagonal opposites to promote good flow around the boiler e.g. top left flow and bottom
right return.
Please note this appliance is not suitable for “DIY” installation therefore only
general guidance is given in this section as your installer will already be familiar
with open vented boiler installation (including best plumbing practices and building
regulations).
