18
19
CARE AND MAINTENANCE
• Clean with a soft, damp cloth .
• Do not use harsh cleaning agents .
• Check components regularly, such as the rotor blades, chassis, motors . If any
component is damaged or worn, do not use the drone until the component has been
repaired or replaced .
• Remove the controller's batteries before storing .
• Store in a cool, dry location . Do not store in high temperatures or near a heat
source .
SPECIFICATIONS
Drone Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Approx . 6 .2 x 6 .2 x 2 .26 in . (15 .8 x 15 .8 x 6 .5 cm)
Drone Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Approx . 4 .8 oz (135 g)
Controller Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 AA (each controller)
Operating Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 5 mins
Drone Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Lithium-Polymer
Drone Battery Charge Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approx . 70 - 75 mins .
Infrared "laser" distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Up to 9 .8 ft (2 .98 meters)
Control Distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Up to 98 ft (30 meters)
ROTOR REPLACEMENT
Each drone comes with four replacement
rotors, two A-type and 2 B-type .
It
is extremely important to use the
correct rotor for replacement.
Using
the incorrect rotor will make the craft
impossible to control .
The marking can be found on the rotor .
Matching rotors are diagonally opposed .
To remove the old rotor, insert the 'v'
end of the included installation wrench
under the rotor and around the plastic
shaft . Hold the drone steadily, then
gently pry the rotor upward until fully
disconnected . Insert the replacement
rotor, ensuring that it is pushed down
completely .
For additional spare parts, contact
Brookstone Customer Service at 800-
292-9819 .
ROTOR B
ROTOR A
FRONT
ROTOR B
ROTOR A
