16
17
GYROSCOPE RECALIBRATION
Each drone includes a 6-axis gyroscope . If the drone is experiencing difficulty flying or is
behaving erratically, the gyroscopes may need to be recalibrated . Do not attempt to do
this while flying . Safely land the drone before attempting this procedure .
Pull the left control stick to the lowest left position, and pull the right control stick to the
lowest right position, as illustrated below . Hold for 2 to 3 seconds and wait for a tone
from the controller . When the LED lights on the drone start blinking, release the control
sticks . When the LED lights turn solid, the gyroscopes are recalibrated and the craft is
ready to fly .
ON
OFF
TRIM ADJUSTMENT
Even after the drone is calibrated, it may show a tendency to drift while airborne .
Adjusting the trim will help counter this effect and allow for better control of the drone .
To enter trim mode, press the Trim button . You will hear a short tone and the LED will
flash red .
Use the Right Control Stick to correct the drift of the drone, pushing it right, left, forward
or backward to correct the drift . Each push will sound a short tone; the LED continues to
flash red . When you hear a long tone, the trim is complete in the selected direction .
To exit trim mode, press the Trim button again . You will hear a short tone and the LED will
turn solid red, indicating that you have exited trim mode . (Alternatively, you will exit trim
mode automatically if there is no operation for two to three seconds .)
Adjusting the trim will help with drift but it will not entirely eliminate it . Turbulence and
other factors may still influence the drone's flight characteristics .
Craft drifts left
Craft drifts right
Craft drifts backward
Craft drifts forward
In trim mode, push the Right Control
Stick to the right .
In trim mode, push the Right Control Stick
to the left .
In trim mode, push the
Right Control Stick
forward .
In trim mode, pull the
Right Control Stick
backward .
