1. Introduction
User Manual
Electrical Hazards
CAUTION
Trip Hazard
Trip hazard exists if the power cord is not routed to in a way to
cause a trip hazard.
Route the cord in an area where there is no travel.
Electrical Hazards
The Brooks Automation, Inc., Polycold Systems P-102 is a high voltage device. At maximum load the
product is capable of drawing close to 11.5 Amps at 200 - 230 VAC VDC. Maximum power
consumption @ rated load for this product is 1620 watts. The minimum overcurrent ratings for
disconnects requires a user installed 230 VAC, 20 A, minimum SCCR rating of 10 KIAC.
The proper precautions for operating and servicing electrical equipment must be observed.
WARNING
Electrical Hazard
The P-102 is a high voltage device. Turn off power and perform
Lockout/Tagout before servicing.
Improper electrical connection and connection to an improper
electrical supply can cause electrical hazards. Improper
handling of the power source or connecting devices can cause
electrical shock or burns. These can result in serious injury or
death or cause an equipment fire and damage to the
equipment.
Always provide the product with the proper electrical code
compliant connections.
Environmental Hazards
Noise
The Brooks Automation Product provides no direct noise hazard.
Vibration
The Brooks Automation Product provides no direct vibration hazard. Any vibrations produced are
minimal and cause no hazardous conditions.
Accelerating Innovation
1-12
