5 | USER INTERFACE
9.17.048
Page 15
The instrument directly connected with the BRIGHT will be
indicated as ‘local’. Other instruments will be indicated
with their node address.
Press or to search another instrument on the bus.
While the message “search” is displayed, the BRIGHT is
searching for a valid node address and it will not show any
specific instrument info till an active node is found.
When an active node address is found, the BRIGHT will
show the corresponding USERTAG or Serial Number in the
topline. It will also show the actual measure and, if applied,
the actual set point.
Press
to select this instrument to be operated by the
BRIGHT or press
to return to the previous selected
instrument.
SET
CANCEL
