brondell FreshSpa Comfort+ FSR-15, Owner'S Manual, Page: 9 / 47

7
Installing the Bidet Attachment
PRODUCT INSTALLATION
1. Install Adjustable Mounting Brackets into the Bidet
Attachment. Place circular mounting brackets into the
circular openings of the bidet attachment.
2. Install bidet attachment on toilet.
a. Place bidet attachment on the toilet so the
nozzle is as close to the back of the toilet bowl
as it will go. This will vary by toilet.
b. Make sure the adjustable brackets line up with
the holes in the toilet fixture. You may need to
rotate the adjustable brackets accordingly to line
them up properly.
c. Replace the toilet seat on top of bidet attachment
and secure using original toilet seat hardware.
Make sure to tighten so that the bidet attachment
and seat do not move.
3. Connect bidet hose to bidet attachment.
Connect the open end of bidet hose to the cold
connection under the bidet attachment.
Step 1
Step 2b
Step 2c
Step 3
NOTE:
If you have already installed the hot water
supply cap over the hot water supply on your
FRS-25 Dual Temperature model, skip to step
5 on page 8. Otherwise, continue with the
installation at the top of page 8.