4
IMPORTANT:
Please be advised that the provided Cold Water T-Valve should
be installed at the fill valve under the toilet tank, and NOT at the
cold water supply coming from the wall.
For FSR-25 Dual Temperature Model Only:
Check the size of the hot water supply connection
(most likely under the sink/wash basin). This should be a
3/8" connection to properly fit and install enclosed T-valve.
Check Water Supply Line
Check the water supply line that connects the toilet tank fill
valve to the water shutoff valve at the wall. If it is a rigid pipe,
you will need to purchase a flexible water supply hose to replace
it before installing the FreshSpa . The length of the hose
may vary and the top connection size should be 7/8" ballcock to
connect to the T-valve that you will install under the toilet tank
and the bottom connection will vary (most common are 3/8" and
½" female compression).
Before Installation
PRODUCT INSTALLATION
NOTE:
The Hot Water T-Valve will be installed at the hot water
supply under your bathroom sink. If you do not have
access to the fill valve under the toilet tank, visit us at
www.brondell.com
or contact us at
1-888-542-3355
for
further assistance.
NOTE:
If the connection is a ½" connection, you will need to
purchase the following reducing adapter available online
and at many plumbing hardware stores:
Reducing Adapter, ½" Female NPT x 3/8" Male Compression
Summary of Contents for FreshSpa Comfort+ FSR-15
Page 47: ... 20FSR15 0227 ...