P.7
Tips on replacing the filter
To review the usage status of the filters at any time,
press and hold the Child Lock button when the child
lock is turned on. The accumulated number of hours
the filters have been in use will display for 10 seconds.
When filter usage reaches 2000, the replacement filter
icon will illuminate.
Check the High Efficiency Antiviral Air Filter. If it is
white or light grey, you can reuse it for another 2000
hours. If it is dark grey or black, you need to replace it.
Follow the guidelines for filter cleaning or filter
replacement.
To reset the timer, press and hold the Timer button for
3 seconds.
Filter installation order
1. Nanocrystalline Filter
2. High Efficiency
Antiviral Air Filter
with Pre-Filter
1
2
Steps to replace the filter
After replacing the filter, turn o
ff
the filter indicator.
1. Open the front panel and
remove the existing filters
2. Insert the Nanocrystalline
Filter
3. Insert the High
Efficiency Antiviral
Air Filter with Pre-Filter
4. Insert the front
panel and the filter
is successfully
replaced
1. Pre-Filter: captures hair, fiber, large particles, dander, etc., can be vacuumed and reused.
2. High Efficiency Antiviral Air Filter: This filter is an H12 HEPA Grade filter, good at capturing small particles.
It has low penetration, large capacity for holding dust, high clean air delivery rate can e
ff
ectively filter
smoke and dust, especially for PM2.5, e
ffi
ciently filtering particles as small as 0.01μm. The filter is coated
with a proprietary patent-pending formula that can effectively kill human coronavirus, general virus,
bacteria and mold.
3. Nanocrystalline Filter: Sepiolite, diatomaceous earth, and other natural rare non-metallic minerals are
used to make nanocrystalline materials which clear harmful gases, formaldehyde, benzene, VOC and
other smelly pollutants. The nanocrystalline materials have many pores, good at absorbing nanoparticles,
such as formaldehyde, ammonia, and benzene (between 0.4-0.62 nanometers). As these compounds
are nano-sized polar molecules, they can be quickly absorbed.
4
. UV light: UV lamp helps to destroy virus and bacteria inside the machine.
5
. Plasma purification: The positive and negative ions generated by the plasma generator neutralize in the
air and produce huge energy, which results in the change of the microorganism structure around or the
conversion of energy, thereby destroying the microorganisms. As the number of negative ions is greater
than that of positive ions, excess negative ions are still floating in the air, which can remove smoke, dust,
smell, and improve air quality and health.
AIR PURIFYING FUNCTIONS
