OPERATING INSTRUCTIONS
SPEED
SPEED
TIMER
PM2.5
TIMER
SLEEP
CHILD
LOCK
UV
PLASMA
Switch on
Touch the power button to switch on the appliance.
After switching on, the light indicator is always on. When a corresponding function is used, the light indicator under
the icon is always turned on. The area displaying “ — — —” 10s after switching on will show the PM2.5 value.
The appliance operates under the auto mode by default.
The airflow is adjusted according to PM2.5. Auto mode is set as follows:
PM2.5 Value
Air Quality Level
Air Quality Light Color
Airflow Level
10-79
Good
Green
1
80-199
Fair
Blue
2
Bad
Red
200-500
3
Set the timer
1. Touch the “Timer Button” repeatedly to choose the number of hours you want the appliance to operate
(1-12 hours) and the switch-o
ff
time. When the timer is on, the light indicator is on.
Use UV
1. Touch the "UV" button to turn on/off the UV light.
Switch on plasma
1. Touch the "Plasma" button turn on/o
ff
the plasma function.
Use sleep mode
1. Touch the "Sleep" button to enter sleep mode. The air quality indicator will be dimmed. All the light
indicators will be o
ff
except the sleep indicator.
2. The appliance operates under speed 1 in sleep mode. Disable sleep mode and return to previous
setting by touching any button.
Set the child lock
1. Touch the "Child Lock" button to activate the lock function and all the other buttons will not be
responsive. Press and hold for 3 seconds to close.
2. When the child lock is not on, press and hold this button for 3 seconds to view the accumulated
usage time of the filter, displayed in the PM2.5 area. The filter indicator is on and the four-digit
number is displayed.
Changing fan speed
Touch the “Fan Speed" button repeatedly to disable auto mode and manually change the speed among
three settings (speeds 1-3). You can reselect auto mode by touching the button after speed 3.
P.6
