6
bromic.com/heat
PRODUCT OVERVIEW
CONTINUED...
PRODUCT DESCRIPTION
The Platinum Smart-Heat Series Gas Radiant Heaters are designed to provide effective heating.
The heaters incorporate full function electronic controls, allowing them to be operated remotely from a
conveniently located
switch. The heaters have been designed to withstand the rigors of the outdoors.
NOTE: The Platinum heaters are designed only for wall mounting or ceiling pole mounting
PLATINUM SMART-HEAT HEATER DIMENSIONAL DETAILS
IMPORTANT
WARNING
• Do not expose the burner to water or moisture. THE APPLIANCE IS TO BE PROTECTED FROM RAIN.
• Do not use the heater if any of these parts are exposed to water until the appliance is inspected or
repaired by an authorized service person.
GENERAL INFORMATION
The Platinum Series Gas radiant heaters are suitable for outdoor or amply ventilated areas and non domestic
indoor use. In addition to the installation instructions provided, authorised installers must abide by the local gas
installation code. Please note that these standards are subject to change.
The heater is designed to function in winds up to 15Km/h. The heater is subject to reduced performance or
failure in adverse weather conditions such as high wind or extreme saturation.
!
!
Without Heater
Deflector
With Heater
Deflector
497
277
303
255
352
421
297
Platinum 300 = 560
Platinum 500 = 756
306
116
220
348
403
150
263
135
28
Wall Bracket / Control Housing
Mounting Hole Positions
This appliance is approved for outdoor or amply ventilated area use and for NON DOMESTIC INDOOR
APPLICATIONS, and must be installed by authorised persons. For commissioning of the appliance see page 8.
This appliance is to be protected from rain. Install under a protective cover.
This appliance must be installed in accordance with the rules in force. Before installation, check that the local
distribution conditions, nature of gas and pressure, and adjustment of the appliance are compatible.
