6
7
www.bromicheating.com
www.bromicheating.com
HEATER INSTALLATION
CONTINUED...
HEATER INSTALLATION
INSTALLATION CLEARANCES
FOR 2000W & 3000W MODELS
2000W & 3000w models must be installed with the minimum installation clearances shown in below diagrams. 2000W &
3000W models are supplied with short mounting brackets to be used for both ceiling & wall mounting.
INSTALLATION CLEARANCES
FOR 4000W & 6000W MODELS
4000W & 6000W models must be installed with the minimum installation clearances shown in below diagrams. 4000W
& 6000W models are supplied with long mounting brackets to be used for both ceiling & wall mounting.
Alternatively, short mounting brackets can be used for wall mounting of the 4000W & 6000W models to position the
heater closer to the wall. Short mounting brackets must be purchased separately.
CEILING & WALL MOUNTING
1. Mark mounting hole centres on ceiling or wall.
2. Attach mounting brackets to ceiling or wall using
appropriate fasteners (Not supplied).
3. Bring heater up to mounting brackets and lock
into position with M5x10 screw & nut.
4. Rotate heater to required angle. Lock into posi-
tion with self tapping screw.
5. Make electrical connection from heater to power
supply.
CHAIN SUSPENSION
(SOLD SEPARATELY)
1. Heater must be installed with heater surface 94.5”
above the floor level. If required, cut down length
of chain to ensure correct installation height.
2. Attach chains to heater with “S” hooks. Crimp “S”
hooks closed after assembly.
3. Prepare ceiling structure for heater. Attach chains
to ceiling structure & suspend heater.
4. Make electrical connection from heater to power
supply. If required fix suply power cord to ceiling
chain with cable ties.
WARNING
DO NOT MOUNT THE HEATER VERTICALLY!
Heater MUST be installed so that the tube elements
are horizontal. Failure to do this will cause the heating
element within the tube to sag and cause premature
burnout. Installing vertically will void the manufacturers
warrant
y.
!
!
WARNING
DO NOT MOUNT THE HEATER VERTICALLY!
For outdoor installation heater must be mounted with
face of heater angled down.
For longest product life & to maintain product
appearance mount heater under cover & protect from
rain & weather whenever possible.
24”
3”
35.5”
3”
2
3
4
2
3
CEILING & WALL MOUNTING
(1) Mark mounting hole centres on ceiling or wall.
(2) Attach mounting brackets to ceiling or wall
using appropriate fasteners (Not supplied).
(3) Bring heater up to mounting brackets and lock
into position with M5x10 screw & nut.
(4) Rotate heater to required angle.
Lock into position with .
(5) Make electrical connection from heater to
power supply.
CHAIN SUSPENSION
(1) Heater must be installed with heater surface
2400mm above the floor level. If required, cut
down length of chain to ensure correct
installation height.
(2) Attach chains to heater with "S" hooks. Crimp
"S" hooks closed after assembly.
(3) Prepare ceiling structure for heater. Attach
chains to ceiling structure & suspend heater.
(4) Make electrical connection from heater to
power supply. If required fix suply power cord to
ceiling chain with cable ties.
Mounting Hole Centres & Heater Position
2000W & 4000 Models
1
3000W & 6000 Models
10”
12”
45°
5”
45°
30°
30
°
96”(8’)
CEILING MOUNTING MINIMUM
CLEARANCE TO FLOOR
71”(6’)
WALL MOUNTING MINIMUM
CLEARANCE TO FLOOR
12”
18”
12”
13”
12”
96”(8’)
CEILING MOUNTING MINIMUM
CLEARANCE TO FLOOR
71”(6’)
WALL MOUNTING MINIMUM
CLEARANCE TO FLOOR
10”
12”
45°
5”
45°
30°
30
°
96”(8’)
CEILING MOUNTING MINIMUM
CLEARANCE TO FLOOR
71”(6’)
WALL MOUNTING MINIMUM
CLEARANCE TO FLOOR
12”
18”
12”
13”
12”
96”(8’)
CEILING MOUNTING MINIMUM
CLEARANCE TO FLOOR
71”(6’)
WALL MOUNTING MINIMUM
CLEARANCE TO FLOOR
FOR CANADA (CETL)
APPROVAL DO NOT INSTALL
LESS THAN 96” (8’)
FROM THE FLOOR
FOR CANADA (CETL)
APPROVAL DO NOT INSTALL
LESS THAN 96” (8’)
FROM THE FLOOR
