background image

2

3

www.bromicheating.com

www.bromicheating.com

!

IMPORTANT

This manual contains important information about the installation, operation, and 

maintenance of Cobalt Smart-Heat™ Electric Heaters. Please pay close attention to the 

important safety information shown throughout this instruction manual. Any safety 

information will be accompanied by the following safety alert symbols:

      DANGER,       WARNING,       IMPORTANT

• READ THIS MANUAL CAREFULLY before installing or

servicing this product.

• Improper installation, operation, or maintenance can

result in death, severe injury, or property damage.

• This appliance is intended for fixed installation with 230-

240Volt power supply.

• Installation MUST be carried out by a licensed and

authorised technician in accordance with local electrical
codes.

• Patent Pending & Australian Registered Design 338721
• - Use this heater only as described in this manual. Any

other use not recommended by manufacturer may cause
fire, electric shock, or injury to persons.

• - For Domestic and Commercial Use

!

!

!

CONTENTS

IMPORTANT NOTES & WARNINGS

4

PRODUCT OVERVIEW

5

PRODUCT DESCRIPTION AND FEATURES

5

SPECIFICATIONS

5

HEATER INSTALLATION

6

INSTALLATION CLEARANCES

6

CEILING WALL MOUNTING

7

CHAIN SUSPENSION

7

TUBE SUSPENSION

8

CEILING RECESS

9

ELEMENT INSTALLATION

11

ELECTRICAL INSTALLATION

13

WIRING DIAGRAMS

14

SERVICING

15

MAINTENANCE

15

TUBE ELEMENT REPLACEMENT

15

REPLACEMENT PART LIST

16

TROUBLESHOOTING

16

BROMIC HEATING 

Head Office: 10 Phiney Place, Ingleburn NSW 2565 Australia  

Telephone: 1300 276 642 (within Australia) or +61 2 9426 5222 (from overseas)    

Email: [email protected]   Web: www.bromicheating.com 

Note:  Bromic Heating reserves the right to make changes to specifications, parts, components and equipment without prior 
notification. This Installation, operation and service manual may not be reproduced in any form with prior written consent from Bromic 
Heating. 

Summary of Contents for BH0610001










Reviews: