bromic.com
5
6. Carefully remove the 4x
M5x10mm
screws at the rear
of the heater and align the heater trim assembly with the
mounting holes.
The cable is fed through the opening in the centre of the
trim assembly.
7. Re-install the 4x
M5x10mm
screws to attach the
heater to the trim assembly.
8. Feed the heater cable through the IP cover and cable
gland . Attach the IP bracket to the heater using
the
M6x10mm
screw.
When in location, ensure the
M16
cable gland is
fastened using a 20mm (13/16") spanner.
20mm
(13/16")
CEILING RECESS INSTALLATION INSTRUCTIONS CONTINUED ...
NOTE: REAR HEATER BRACKET IS
NOT TO BE
REMOVED.
