Broderson IC-35-2G, Operation And Maintenance Manual

Page: 58 / 71

3-20
6. After the system shows signs of filling, run it in neutral and low idle for 5 minutes.
Then extend the outriggers so that drive wheels can spin freely. Reconnect the
brake release valve if disconnected in step 3. Place the control switch in the
FORWARD position and slowly push the accelerator until the wheels turn slowly.
Run for 5 minutes and repeat in REVERSE direction. Then increase to full throttle
for one minute in each direction.
7. Check fluid level in the reservoir and fill to the proper level. Check all line
connections for leaks and tighten if necessary.