Broderson IC-35-2F, Operating And Maintenance Manual, Page: 12 / 71

1-7
Brakes:
Standard:
Primary braking from hydrostatic transmission. Foot-actuated disc brake
attached to each torque hub for additional braking in some conditions. Parking
brake switch locks brakes to hold crane when not being driven.
Tires:
Standard:
7.50 x 10 pneumatic tires, 16 ply. Pressurized to 150 psi (1000 kPa) for crane
rated loads.
Optional Tires:
Solid Rubber Tires:
For applications where hazardous ground conditions exist. These tires do
not change the overall height or ground clearance.
Net Weight: 240 pounds (109 kg)
Solid Rubber Tires Non-Marking:
Same as solid rubber tires except non-marking.
Net Weight: 240 pounds (109 kg)
Foam Filling of Tires:
Standard tires, foam filled to prevent flats.
Net Weight: 312 pounds (142 kg)
Spare Tire & Wheel:
7.50 x 10 pneumatic tires, 16-ply. Front or rear axle must be specified.
Net Weight: 80 pounds (37 kg)
Chassis:
Standard:
Cargo Deck:
29 square foot (2.7 m
2
) area. A maximum of 6,000 pounds (2720 kg) may be
carried on the deck when centered over or to the rear of the front axle. Nine
stake pockets are provided in deck and nine 1.3 inch (34 mm) outside
diameter pipe stakes.
Outriggers:
Four hydraulic outriggers with box beam construction. Independent controls
for each. Hydraulic cylinders are equipped with direct connected holding
valves. Pad dimensions are 6 inches (152 mm) by 8 inches (203 mm).
Lifting Rings:
Includes four lift rings, one at each corner of the chassis for attaching lifting
sling cables.
Front Pulling Eye:
Heavy eye in front bumper provides for attachment of hook block so main
winch line can be used for pulling loads at or near floor level.
Courtesy of Crane.Market