1-7
Brakes:
Standard:
Split-system, four-wheel hydraulically-boosted multiple-plate wet disc brakes. Uses mineral
oil. Hand lever actuated disc-type parking brake on transmission.
Tires:
Standard 2-Wheel & 4-Wheel Drive:
385/65D22.5, 16-ply, high-traction on/off road tread.
Tire
Options:
Foam Filling of Tires:
Foam filling of four IC-250 tires. Net Weight: 2000 pounds (907kg)
Non-Marking
Pnuematic:
385/65D22.5 16-ply. Net Weight: 20 pounds (9kg)
Spare Tire and Wheel, Mounted:
Extra wheel with 385/65D22.5 tire mounted, ready for service.
Net Weight: 350 pounds (159kg)
Spare Tire and Wheel, Mounted, Non-Marking Pnuematic:
Extra wheel with Non-Marking 385/65D22.5 tire mounted, ready for service.
Net Weight: 355 pounds (161kg)
Chassis:
Standard:
Cargo
Deck:
Total Deck Area: 80 Square feet (7.4m
²).
Front deck 94” (239cm) X 62” (157cm), RH
side deck 182” (462cm) X 28” (71cm). A maximum of 17,000 pounds (7700kg) may be
carried on the deck when centered over or between axles. Seven stake pockets are
provided along edges of deck for 1-inch (25mm) pipe stakes. Stakes furnished. Cargo
decks have skid resistant coating.
Headlight and Taillight Grilles:
Steel protective grilles for headlights and taillights. Easily removable for replacing bulbs.
Outriggers:
Four hydraulic out-and-down outriggers of box-beam construction. Independent controls
for each outrigger. Hydraulic cylinders are equipped with direct-connected holding valves.
Pad dimensions: 9 inches (23cm) x 9 inches (23cm).
Pulling
Eyes:
Two heavy eyes in front bumper provide for attachment of hook block so main winch line
can be used for pulling loads at or near floor level. Also for anchoring tag lines from load
on hook.
Tie Downs:
Two holes in the rear bumper (in conjunction with the pulling eyes) provide tie down
locations for transporting crane by truck or cargo container.
Accessory Storage Box:
Consists of front deck plate with removable and lockable cover, and box for carrying
sheave block and other items. Storage box is 14" (35cm) deep x 12½" (32cm) long x
36½" (93cm) wide.
Summary of Contents for IC-250-3D
