Flush Mount Rack Kit Installation Procedure
5 of 10
53-1002127-03
FIGURE 1
Items in the Flush Mount Rack Kit
Installation procedure
ATTENTION
The switch must be turned off and disconnected from the fabric during this procedure.
NOTE
Although this document describes how to install both single height (1U) and double height (2U) switches, the
illustrations show a 2U switch as a typical installation.
Complete these tasks to install the switch in a rack:
•
“Attaching front brackets to the switch”
•
“Attaching front brackets to a rack”
•
“Attaching rear brackets to a rack”
1
Front brackets, right and left
4
Screw, 6-32 x 1/4-in., flathead Phillips
2
Rear brackets, right and left
5
Screw, 10-32 x 5/8-in., panhead Phillips
3
Screw, 8-32 x 5/16-in., panhead Phillips
6
Retainer nut, 10-32
scale: 3/16" = 1"
1
2
3
4
5
6
(8x)
(8x)
(12x)
(8x)
(10-32)
(10-32 x 5/8 in.)
(6-32 x 1/4 in.)
(8-32 x 5/16 in.)
1
2
2
1
