Brocade Communications Systems VA-40FC Hardware Reference Manual Download Page 3

Page: 3 / 60

Brocade VA-40FC Hardware Reference Manual

iii

53-1001540-04

Contents

About This Document

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Supported hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . vii

What’s new in this document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Document conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Notice to the reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Additional information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

Getting technical help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Document feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

Chapter 1

Brocade VA-40FC Introduction

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Brocade VA-40FC overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Port side of the Brocade VA-40FC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Non-port side of the Brocade VA-40FC . . . . . . . . . . . . . . . . . . . . . . . . 4

Field replaceable units (FRUs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Ports on Demand license . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

ISL trunking groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Fabric OS Native and Access Gateway modes . . . . . . . . . . . . . . . . . . 6

Disabling and enabling Access Gateway mode . . . . . . . . . . . . . . 7

Chapter 2

Brocade VA-40FC Installation and Configuration

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Items included with the Product Name . . . . . . . . . . . . . . . . . . . . . . . . 9

Installation and safety considerations. . . . . . . . . . . . . . . . . . . . . . . . . 9

Electrical considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Environmental considerations . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Cabinet considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Recommendations for cable management . . . . . . . . . . . . . . . . 11
Items required for installation. . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installing a standalone Product Name . . . . . . . . . . . . . . . . . . . . . . .12

Cabinet installation for a Product Name . . . . . . . . . . . . . . . . . . . . . .12

Summary of Contents for VA-40FC





























































Search results

Summary of Contents for VA-40FC

Reviews:

Related manuals for VA-40FC

Brands by name

Popular brands

Brocade Communications Systems VA-40FC, Hardware Reference Manual

Search results

Summary of Contents for VA-40FC

Reviews:

Related manuals for VA-40FC

Brands by name

Popular brands