Brocade Communications Systems VA-40FC Hardware Reference Manual Download Page 10

Page: 10 / 60

Brocade VA-40FC Hardware Reference Manual

53-1001540-04

Additional information

This section lists additional Brocade and industry-specific documentation that you might find
helpful.

Brocade resources

To get up-to-the-minute information, go to

http://my.brocade.com

and register at no cost for a user

ID and password.

For additional Brocade documentation, visit the Brocade SAN Info Center and click the Resource
Library location:

http://www.brocade.com

Release notes are available on the My Brocade website (

http://my.brocade.com)

and are also

bundled with the Fabric OS firmware.

Other industry resources

•

White papers, online demos, and data sheets are available through the Brocade Web site at

http://www.brocade.com/products/software.jhtml

•

Best practice guides, white papers, data sheets, and other documentation is available through
the Brocade Partner Web site.

For additional resource information, visit the Technical Committee T11 Web site. This Web site
provides interface standards for high-performance and mass storage applications for Fibre
Channel, storage management, and other applications:

http://www.t11.org

For information about the Fibre Channel industry, visit the Fibre Channel Industry Association Web
site:

http://www.fibrechannel.org

Summary of Contents for VA-40FC





























































Search results

Summary of Contents for VA-40FC

Reviews:

Related manuals for VA-40FC

Brands by name

Popular brands

Brocade Communications Systems VA-40FC, Hardware Reference Manual

Search results

Summary of Contents for VA-40FC

Reviews:

Related manuals for VA-40FC

Brands by name

Popular brands