Brocade Mobility 650 Access Point Installation Guide
21
53-1001934-02
Chapter
4
Regulatory Compliance
Regulatory overview
All Brocade devices are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required. Any changes or
modifications to Brocade equipment, not expressly approved by Brocade, could void
the user’s authority to operate the equipment.
Brocade access points must be professionally installed and configured so that the
Radio Frequency Output Power will not exceed the maximum allowable limit for the
country of operation.
Antennas: Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could cause damage and
may violate regulations. Use of and unapproved antenna is illegal under FCC
regulations subjecting the end user to fines and equiment sesure.
Radio modules
This access point contains approved radio module(s) MB82. These module(s) are
identified below.
MB82 – a DFS Master WLAN 802.11 abgn MIMO 2x3 radio module.
Wireless device country approvals
Regulatory markings, subject to certification, are applied to the device signifying the
radio(s) is/are approved for use in the following countries: United States, Canada,
Japan, China, S. Korea, Australia, and Europe.
Please refer to the Symbol Declaration of Conformity (DoC) for details of other
country markings. This is available at
http://www2.symbol.com/doc/
.
