Brocade Mobility 650 package contents
1
Brocade Mobility 650 Access Point Installation Guide
3
53-1001934-02
•
Clips for mounting on a suspended ceiling T-bar
•
Lock port for Kensington® style Security Lock
The Brocade Mobility 650 has one RJ-45 connector supporting an 10/100/1000
Ethernet port and requires 802.3af-compliant power from an external source.
NOTE
When operating in a Gigabit Ethernet environment CAT-5e or CAT-6 cable is required
for Gigabit operation.
The Brocade Mobility 650 comes in both single and dual radio versions both
supporting 802.11a/b/g/n.
The Brocade Mobility 650 Access Point contains runtime firmware which enables
the unit to boot after either a power up or a watchdog reset. The runtime firmware
on the access point and the firmware downloaded from the switch can be updated
via the Ethernet interface from the Wireless Controller.
