LED indicators
2
16
Brocade Mobility 650 Access Point Installation Guide
53-1001934-02
The 5 GHz antenna suite includes the following models:
For detailed specifications on the antennas available to the Mobility 650, refer to
the
Enterprise Wireless LAN Antenna Specification Guide
available at
http://www.brocade.com/support/
.
LED indicators
Both the Integrated Antenna model and the External Antenna model have LED
activity indicators on the front of the case for use with wall mount. With the External
Antenna model unit mounted above a ceiling, LEDs are at the center of an oval
badge on the ceiling; a light pipe enables viewing the back LEDs through the ceiling
tile.
The LEDs provide a status display indicating error conditions, transmission, and
network activity for the 5 GHz 802.11a/n (amber) radio or the 2.4 GHz
802.11b/g/n (green) radio.
Part Number
Antenna Type
ML-5299-HPA1-01R
Omni-Directional Antenna
ML-5299-PTA1-01R
Patch Antenna
ML-2452-APA2-01
Dual-Band
ML-2452-PNA5-01R
Panel Antenna
ML-2452-PTA3M3-036
Omni-Directional Antenna
Task
5 GHz Activity LED (Amber)
2.4 GHz Activity LED (Green)
Unadopted
Off
Blinking at 5Hz
Normal
Operation
If this radio band is enabled:
Blink at 5 second interval
If this radio band is disabled:
Off
If there is activity on this band:
Blink at a 1Hz
If this radio band is enabled:
Blink at 5 second interval
If this radio band is disabled:
Off
If there is activity on this band:
Blink at a 1Hz
Firmware
Update
On
Off
Locate AP
Mode
Blink at 5Hz
(Out of Phase with Activity LED)
Blink at 5Hz
(Out of Phase with Activity LED)
