Brocade Communications Systems Brocade TurboIron 24 Series, Hardware Installation Manual, Page: 26 / 78

26 Brocade TurboIron 24X Series Hardware Installation Guide
Part Number: 53-1003053-03
Installing the TurboIron 24X
Installing the device
3. Attach a rack-mount bracket to one side of the Network switch with the supplied screws. Then attach the other bracket to the
other side.
Make sure you use the screws supplied with the mounting brackets. Using the wrong screws could
damage the TurboIron 24X and would invalidate your warranty.
Figure 1 shows how to attach the short mounting brackets.
FIGURE 1 Attaching the short mounting brackets
Mount the device in the rack as illustrated in Figure 2 .
FIGURE 2 Installing the device in a rack
4. Proceed to “Powering on the system” .