Brocade TurboIron 24X Series Hardware Installation Guide
17
Part Number: 53-1003053-03
Product Overview
Hardware features
•
The Management port has a Link LED and Activity LED to indicate port status. The Link LED is on the left of the copper
connector and the Activity LED is on the right.
•
The System power on LED is on the left side of the front panel.
•
The dual power supply 1 and 2 LEDs are on the front panel of the power supply (when you are facing the rear of the device).
Power supplies
Each TurboIron 24X device comes with dual alternating-current (AC) power supplies (RPS-TI24X). Power supplies are hot-swappable.
TABLE 2
LEDs
LEDs
Position
State
Meaning
10Gbps Port LEDs
LNK or ACT
Located under the 10-GbE
ports
On
The port is connected.
Off
No fiber port connection exists or the
link is down.
Blinking
Traffic is begin transmitted or
received on the fiber port.
10/100/1000 Copper Port LEDs
Lnk
This is the left LED on RJ45
On
The port is connected.
Off
No copper port connection exists or
the link is down.
Act
This is the right LED on RJ45
On or Blinking
Traffic is being transmitted or
received on the copper port.
Off
No traffic is being transmitted or
received on the fiber port.
Management Port LEDs
Lnk
This is the left LED on RJ45
On
The port is connected.
Off
No copper port connection exists or
the link is down.
Act
This is the right LED on RJ45
On or Blinking
Traffic is being transmitted or
received on the copper port.
Off
No traffic is being transmitted or
received on the fiber port.
System Power and Power Supply LEDs
Power
On the upper left side of the
front panel (when facing the
front of the device)
On
The device is powered on and has
enough power to operate.
Off
The device is not powered on, or has
been powered on but does not have
sufficient power to operate.
AC OK
Upper center of power supply's
front panel (when facing the
rear of the device)
On
Indicated power supply is installed
and is functioning normally.
NOTE:
Power supply 1 is located in
the right-hand bay and power
supply 2 in the left-hand bay
(when facing the rear of the
device).
Off
Power supply is not installed or is not
providing power.